Thermometer Accessories
Ace Glass, Inc. Adapter, #7 Ace-Thred top, 14/20 inner bottom, nylon bushing with PTFE ferrule
#7 Ace-Thred mini adapter with 14/20 inner joint bottom, and nylon bushing with PTFE ferrule. Used for probes, thermometers, bleed tubes, and electrodes. Adapter will accomm ODate items up to 6.4mm diameter. Suitable for vacuum work.
Ace Glass, Inc. Thermometer adapter, PTFE, 24/25 to compression seal, use with 6-7mm diameter tubes, Viton; O-rings
24/25 PTFE thermometer adapter with FETFE o-ring, for use with plain stem thermometers, gas inlet tubes, etc. The o-ring compression seal on the adapter allows adjustable depth positioning. Adapter accomm ODates tubes up to 7mm.
Ace Glass, Inc. Sensor probe, J thermocouple, 1/4in OD x 12in inconel sheath, 72in male mini plug lead
Sensor probe, J thermocouple, 1/4in OD x 12in inconel sheath, 72in male mini plug lead
Cole-Parmer Digi-Sense RTD Probe, 100 Ohm, 3-ft SS Braid Cable; 9" L
RTD bendable probes are designed to measure temperature in a confined space.Maximum error for probe assembly is 1.1C + 0.12% of reading below 300F, 0.35% of reading above 300F. Alpha coefficient is 0.003850 omega/omega/C (DIN IEC 751). Resistance at ice point (0C) is 100 omega.
Cole-Parmer Digi-Sense Thermistor Probe, 304 SST, 5 / 32" Dia, 4.5" L, Phono Plug, 10ft Lead
Thermistor probes offer excellent accuracy over the biological temperature range. Probes are electronically isolated and come with a 10 ft. lead with a phono plug (unless otherwise specified). Probes are designed for multiple applications. Time Constant: 1-4 seconds or greater
Cole-Parmer Type-K, 45 Angle Surface Probe, 10" L, Mini-Connector, Exposed, 5ft Coil Cord
Note: the temperature range is for the probe tip only. The handle material may be affected if the probe is rated higher than the handle depending on exposure time, application, and handle material. ABS handles are rated to 220F (104C); PVC handles are rated to 200F (93C); Stainless Steel handles are rated at 450F (232C); Mini Connectors are rated to 392F (200C).
Cole-Parmer Digi-Sense Thermocouple Wire Type K 20-Gauge, High Temperature Glass Braid, 100ft
Wire comes in 20-gauge size, ideal for fabricating your own probes or extension cables (meets ANSI and ASTM standards). Choose from wire with polyvinyl chloride (PVC), fluorinated ethylene propylene resin (FEP/FEP), fiberglass, high-temperature fiberglass, or ceramic fiber outer/inner insulation. These cables are also available in 100-ft or 1000-ft lengths for any application.
Cole-Parmer Digi-Sense Economical Hi-Accy RTD Probe 3 Wire 3 P" Connector, 1 / 4" Dia 20" L 1M Cable
Ideal for applications where accuracy is a factor but so is cost. Alpha coefficient is 0.003850 omega/omega/C (DIN IEC 751). Resistance at ice point (0C) is 100 omega. Time Constant: 2 seconds or greater.
Thermco Products Inc 60ml PETG plastic bottle w/sand
60ml bottle with insulating sand for liquid-in-glass thermometer and/or temperature probes to monitor temperatures in low temp freezer & oven and other laboratory instruments. Bottle is filled with sand and has dual magnets to install on doors or wall of the instrument saving space
American Diagnostic Corporation Adtemp™ Thermometer Sheaths, Single Use for ADC and Most Digital Stick Thermometers, 100/PK
Single use digital stick thermometer sheaths to reduce the risk of cross contamination.
The Adtemp™ Thermometer Sheaths features:
Non-sterile, disposable design helps eliminate cross contamination
Cost effective and easy-to-apply
Suitable for oral or rectal use
Designed for use with ADC and most comparably sized digital thermometers
McMaster-Carr Thermocouple Connector
Thermocouple ConnectorRound-Pin Male, Screw Terminal, Type K, 400°F Maximum